Automatic Operation - Fri-Jado Bake Basic 3 - E Instrucciones De Manejo

4.4.2.

Automatic operation

Action
1 Switch on the oven
2 Select a programme mode
3 Select the required programme
4 Start the programme
5 After the preheating has expired, the
oven will give a sound signal and
Load will flash on the display
6 Start baking the products
7 After the baking time has expired, the
oven will give a sound signal and
End appears on the display
8 Switch off the oven or go to step 3
•
The LED above the
user. For example, while pre-heating, loading and recipe processing.
• Pressing the
immediately proceed with baking the products.
4.4.3. View and change the temperature while baking
You can view and change the temperature while baking.
During baking, press the button
set temperature using the
4.4.4. View and change the baking time while baking
You can view and change the baking time while baking.
During baking, press the button
change the set remaining baking time using the
4.4.5. Stop during the baking process
After pre-heating, you can interrupt the baking process at all times by pressing the
Operation
Now put the products
into the oven if a
programme without
pre-heating has been
selected and proceed
with step 6
Now put the products
into the oven.
Take the products out
of the oven or press
button will flash while the oven is busy with a process started by the
button while pre-heating will abort the pre-heating. The oven will then
to make the set temperature appear on the display. You can change the
and buttons.
to make the remaining baking time appear on the display. You can
and
en / 2-13
Bake Basic 3/5 - E & P
Display (after operation)
The last set baking time appears
The LED above
the last used programme will
appear on the display
/ selected programme
PREh and the LED above
flashing
Load, (flashing) The temperature
is not maintained while loading the
products.
Set baking time expires and LED above timer symbol flashing
Last used programme
buttons.
lights up and
is
button.
9123573_1007