Fri-Jado Bake Basic 3 - E Instrucciones De Manejo página 36

Bake Basic 3/5 - E & P
4.4.6. Set a new programme or change an existing programme
Action
1 Switch on the oven
2 Open the programme mode
3 Select a programme number
4 Confirm the programme number
5 Set the pre-heating temperature
6 Select the baking time
7 Set the required baking time for
baking phase 1
8 Select the baking temperature
9 Set the required baking temperature
for baking phase 1
10 Select steam pulses
11 Set the number of steam pulses.
Enter 0 when no steam is required.
12 Select the steaming method
13 Select the steaming method:
Enter 0 when no steam is required.
14 Go to step 6 to programme the
second or third baking step or go to
step 12 to save the programme.
15 Save the programme
16 Exit the programme mode
17 Switch off the oven
9123573_1007
Operation Display (after operation)
The last set baking time appears.
P with the first unused programme
3 seconds
and the LED above
/
P with the selected programme
_
flashing
/
•
•
_
flashing
/
_ and the required baking time
_
flashing
/ _ and the required baking
temperature
_
flashing
/ _ and the required number of
steam pulses
_nn0 and the LED above
flashing
_nn0 at the beginning of the step
/
_nn1
=
2x
=
SAVE and Done alternately
The last set baking time appears.
3 seconds
en / 2-14
is flashing.
0 and the LED above
PH=0 no pre-heating
PH=0 pre-heating
0 and the LED above
0 and the LED above
0 and the LED above
spread over the step
step 2
0
step 3
0
is
is
is
is
is