Home" Menu; Status Menu - Grundfos MAGNA3 D Instrucciones De Instalación Y Operación

Ocultar thumbs Ver también para MAGNA3 D:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

9.4 "Home" menu

Navigation
"Home"
Press
to go to the "Home" menu.
This menu offers the following (factory setting):
Shortcut to "Control mode" settings
Shortcut to "Setpoint" settings
Estimated flow
Head.
Navigate in the display with
or
two shortcuts with
or
.
Display icons
Symbol
Description
Automatic night setback function is enabled.
Settings are locked. You cannot adjust settings
from the display.
The pump is in remote mode, for example from
fieldbus.
The multipump system is active.
Master pump in a multipump system.
Slave pump in a multipump system.
Forced local mode is active.
You cannot set the pump to remote mode, for
example from fieldbus.
You can define the "Home" display. See section "Define Home
display", page 53.
, and change between the

9.5 Status menu

Navigation
"Home" > Status
Press
and go to the Status menu with
This menu offers status information on the following:
Operating status
Pump performance
Power and energy consumption
Warning and alarm
Heat energy monitor
Operating log
Fitted modules
Date and time
Pump identification
Multipump system
Navigate between the submenus with
submenu with
and return to the Status menu with
Detailed information on "Heat energy monitor" is available in the
following section 9.5.1 "Heat energy monitor".
Fig. 57 Example of the submenu "Operating status" showing
the pump running in normal operation in a multipump
system.
.
or
. Choose a
.
43

Publicidad

Tabla de contenido
loading

Tabla de contenido