Impecca IWA-08KSFP Manual Del Usuario página 10

FIGURE 4
2.
Keep a firm grip on the air conditioner, and carefully place the unit into the window opening so that the bottom of
the air conditioner frame is against the windowsill (See Fig. 5). Carefully close the window behind the top rail of the
unit.
3.
Extend the side panels out against the window frame (See Fig. 6).
Once the panel has been installed on the side of the cabinet,
make sure it sits securely inside the frame channel by making
slight adjustments. Slide the top and bottom ends of the
frame into the top and bottom rails of the cabinet. Figure 4
Note: If storm window blocks AC, see Figure 13
4.
Place the frame lock between the frame extensions and
the windowsill (as shown in Fig. 7).
Drive ¾" (19mm) or ½"(13mm) locking screws through the
frame lock and into the sill ( See Fig. 8).
Note: To prevent windowsill from splitting, drill 1/8" (3mm)
pilot holes before driving screws.
- 9 -