Operation Of Power Cord Current Device; Air Conditioner Features And Operation Instructions - Impecca IWA-08KSFP Manual Del Usuario

OPERATION OF POWER CORD CURRENT DEVICE

The power supply cord contains a current device that senses damage to the power cord. To test your power supply cord
do the following:
1. Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST button, you will notice a click
as the RESET button pops out.
3. Press the RESET button, again you will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On some products this it also
indicated by a light on the plug head.)
NOTES:

Do not use the current device to turn the unit on or off.

Always make sure the RESET button is pushed in for correct operation.

The power supply must be replaced if it fails reset when either the TEST button is pushed, or if it cannot be
reset. A new one can be obtained by contacting technical support.

If power supply cord is damaged, it cannot be repaired. It MUST be replaced by one obtained from the
product manufacturer.

AIR CONDITIONER FEATURES AND OPERATION INSTRUCTIONS

Before you begin, thoroughly familiarize yourself with the control panels as shown below and all its functions, then
follow the symbol for the functions you desire. The unit can be controlled by the unit control panel located on the front
of the device or with the remote controller.
Adjusts Temperature
or Time
Activates Timer
Check Filter Reset
button
Sets Mode
Energy Saver Mode
UNIT CONTROL PANEL (1)
PMTS
Adjusts Temperature
or Time
Displays Temperature
or Time
Clean Air Mode
(some models only)
Sleep Mode
Set Fan Speed
PMTS Indicator
(some models only)
Turns Unit On or Off
- 11 -
UNIT CONTROL PANEL (2)
PMTS