SATA SATAjet K 1800 spray mix Instrucciones De Servicio página 123

Operating instructions
2.3. Use In Explosive Areas
Danger to life from explosion
When using the spray gun in potentially explosive atmospheres of ex-
zone 0, it is possible for an explosion to occur.
→ Never bring the spray gun into potentially explosive atmospheres of
ex-zone 0.
The spray gun is permitted for use / storage in explosion hazard areas of
ex-zone 1 and 2. The product labelling must be adhered to.
2.4. Safety Instructions
Technical status
■ Never start using the spray gun when damaged or when parts are
missing.
■ If the spray gun is damaged, stop working with it immediately, discon-
nect it from the compressed air and material supply system and depres-
surise the unit completely.
■ Never make any unauthorised modifications or technical changes to the
spray gun.
■ Every time before using the spray gun, check the unit with all connected
components for any signs of damage and ensure it is fitted firmly; carry
out any necessary repairs.
Coating materials
■ Processing acidic or alkaline coating materials is prohibited.
■ The processing of solvents with halogenated hydrocarbons, petrol, ker-
osene, herbicides, pesticides and radioactive substances is prohibited.
Halogenated solvents can result in explosive and corrosive chemical
compounds.
■ The processing of aggressive substances containing sharp, abrasive
pigments is prohibited.
■ Never bring more solvent, paint, varnish or other dangerous coating
materials into the working environment of the spray gun than you need
to continue working. Always move these materials to correct storage
rooms after work has finished.
Operating parameters
■ Only operate the spray gun within the parameters stated in the Techni-
SATAjet K 1800 spray mix
Warning! Risk of explosion!
EN
123