Mounting The Control Panel Handle; Mounting The Back Handle; Securing The Chimney; Installing The Lid Stopper - Pit Boss PLATINUM BRUNSWICK PBV5PL Instrucciones Y Recetas

9. MOUNTING THE CONTROL PANEL HANDLE

Parts Required:
1 x Lid Handle (#6)
2 x Screw (#D)
Installation:
• Located the Control Panel on the front side of the unit. Mount the Lid
Handle onto the Lid of the Control Panel using two screws.

10. MOUNTING THE BACK HANDLE

Parts Required:
1 x Back Handle (#7)
4 x Screw (#B)
Installation:
• Mount the Back Handle onto the back side of the hopper using four
screws. Note correct location in illustration.

11. SECURING THE CHIMNEY

Parts Required:
1 x Chimney Cap (#3)
1 x Chimney Stack (#4)
4 x Screw (#C)
Installation:
• Locate the chimney opening on the top of the Main Cabinet. From the
outside, secure the Chimney Stack to the top panel using four screws.
Next, twist the Chimney Cap onto the top of the Chimney Stack.
NOTE: Adjust the Chimney Cap to affect the airflow inside the Main
Cabinet. If cooking at lower temperatures, keep the Chimney Cap
more open.

12. INSTALLING THE LID STOPPER

Parts Required:
1 x Lid Stopper (#2)
2 x Screw (#C)
Installation:
• Install the Lid Stopper onto the top of the Main Cabinet, between the
hopper lid hinges, using one screw on the top side and one screw on
the inside edge.
10
9
6
D
10
7
11
C
12
C
2
B
B
3
4
C