PROPAIN Trickshot Manual De Instrucciones página 10

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

// ADJUSTING THE SUSPENSION ELEMENTS
Your bike is delivered with a basic fork setup. Before the first ride, the air pressure in the fork must be adjusted to your body weight.
1
1.
Unscrew the valve cap of the fork.
2.
Screw on the shock pump and inflate the fork to the required pressure.
→ Observe the instructions for operating the shock pump.
→ We recommend a SAG* of 15% - 20% on the fork. Be sure to observe the manufacturer' s
specifications of the fork for air pressure. The corresponding manuals are included.
3.
Unscrew the shock pump and screw the valve cap onto the valve.
A
B
* The air pressure of your suspension elements is adjusted via the so-called
SAG (negative travel). The SAG is the degree by which the shock and the fork
compresses under the weight of the rider. To adjust the SAG, sit on the bike with
all your cycling equipment (helmet, backpack, shoes, etc.) and take a normal
riding position. No air can escape when unscrewing the shock pump.

Publicidad

Tabla de contenido
loading

Tabla de contenido