Disc Brakes - PROPAIN Trickshot Manual De Instrucciones

DISC BRAKES:

1. Brake in the brake pads.
Choose a road away from public roads and brake 20 to 30 times with the front or rear brake from a speed of 30 km/h down to 5 km/h. Braking should be as hard as possible without locking any of the
wheels. Then repeat the procedure for the second brake. Only then can the brake develop its full braking force.
Please see the brake manufacturer' s instructions for more information (see also „8.2 Further Information" on page 40).
2. Check the function of the brakes while riding.
Normally, the brake lever for the rear brake is located on the right side of the handlebar, the brake lever for the front brake is located on the left side. On customer request, the brake levers can
also be installed inverted.
If the arrangement on your bike is new and unfamiliar to you, you need to be extra careful on your first few rides. Familiarize yourself with the function and braking force of your brakes while riding
slowly.
Many brakes offer the possibility to adjust bite point and lever reach. Please see the brake manufacturer' s instructions for more information (see also „8.2 Further Information" on page 40).