V. 4. Symbols and abbreviations
Positive End Expiratory Pressure.
A.S.S.
After Sales Service.
I/E
Inspiratory time/Expiratory time ratio
Respiratory frequency (cycles per
F/RR (cpm/bpm)
minute).
Pressure value (in cmH
P(cmH
O/hPa)
2
Important: Consult accompanying
documents.
Type B apparatus
Class II apparatus (double insulation)
C
Conforms to directive 93/42/CEE
0459
(established by organization No. 0459).
IP34
Protected against penetration by
solids of diameter greater than or
equal to 2.5 mm and against water-
spray ingress.
Do not grease.
Fire risk. Keep aware from all inflammable
materials or liquids.
Maximum operating pressure setting (in
Pmaxi (cmH
O/hPa)
2
cmH
O or hPa).
2
0
Stop
Ventilation in VC - VAC mode with an
FiO
of 100 %.
2
Ventilation in VC - VAC mode with an
FiO
> 50 % (O
2
Selection button for parameters to set
(other than V
that is: I/E, inspiratory trigger, Pmini
and Fmaxi.
O or hPa)
2
/ ambiant air mixture).
2
, frequency and PEEP),
T
YL024400 - V 2.1 - 10/2012
Setting button: increases the selected
parameter value.
Setting button: reduces the selected
parameter value.
Validation button: validates a changed
ventilation parameter value.
Button for displaying patient parameters
during ventilation (f and I/E).
Screen highlighting
Audible alarm inhibit
ALARM
Visual alarm indicator
Mains supply operation indicator
Battery supply operation indicator
Limited battery autonomy indicator
(≤ 60 minutes)
Oxygen supply ( : fixed O
Patient connection ( : patient circuit;
: expiratory control valve circuit)
Electrical supply
Sense of gas circulation
see § concerning internal electrical
supply.
e2
Compliance with Directive 72/245/EEC and
95/54/EC under homologation number 03090.
EN
outlet)
2
19