10. Technical Service
WARNING
Danger to life of patients and users if the product malfunctions and/or
protective measures fail or are not used!
►
Do not perform any servicing or maintenance work under any cir-
cumstances while the product is being used on a patient.
►
Do not modify the product.
Modifications carried out on medical technical equipment may result in
loss of guarantee/warranty rights and forfeiture of applicable licenses.
►
For service and repairs, please contact your national B. Braun/Aesculap
agency.
Service addresses
Aesculap Technischer Service
Am Aesculap-Platz
78532 Tuttlingen / Germany
Phone:
+49 (7461) 95 -1601
Fax:
+49 (7461) 14 -939
E-Mail:
ats@aesculap.de
Other service addresses can be obtained from the address indicated above.
11. Accessories/Spare parts
Art. no.
Designation
GB257R
ECCOS sieve basket with fixation for GA344
GB262R
ECCOS sieve basket with fixation for GA844
GB600
STERILIT Power Systems oil spray
GB600880
Oil spray adapter for GA344/GA844
TA011944
Cleaning brush
GB715R
ECCOS holder single
GB716R
ECCOS holder triple
GA031R
Key for large Jacobs chuck
GA062R
Chuck key for small three-jaw chuck
TA014552
Instructions for use, attachments for small drill GA344
and drill GA844 (for ring binder)
TA014553
Instructions for use, attachments for small drill GA344
and drill GA844 (flyer)
12. Technical data
12.1 Classification acc. to Directive 93/42/EEC
Art. no.
Designation
GB870R
Medullary reaming attachment, large Jacobs
chuck
GB871R
Medullary reaming attachment AO large
GB872R
Medullary reaming attachment
Hudson/Zimmer
GB878R
Drill attachment for Synthes 511.300
GB881R
Drill attachment large Jacobs chuck
GB882R
Drill attachment small Jacobs chuck
GB884R
Drill attachment AO small
GB886R
Drill attachment Aesculap hexagon
GB887R
Drill attachment dental shaft
GB891R
Sagittal saw attachment
GB892R
Reciprocating Saw attachment
GB894R
Kirschner wire attachment
GB896R
Screw attachment AO small
GB897R
Screw attachment Aesculap hex
12.2 Performance data, information about standards
Rotational direction
Right and left rotation, oscillation
Conforming to stan-
IEC/DIN EN 60601-1
dard
The product was subject to 500 preparation cycles as a test by the manu-
facturer and has passed.
The performance data for the individual attachments can be found in the
table below.
en
Class
IIa
13