Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Failure to observe the above, could make the
appliance unsafe.
For installation, the qualified electrician
must fit an omnipolar switch in accord-
ance with the safety regulations in force
and with 3 (0,12) or more mm (in) between
contacts.
To avoid dangerous overheating, make
sure the supply cord is fully uncoiled.
Do not obstruct the extraction and/or dis-
sipator grids, especially of the cup warmer.
The user must not replace the appliance
supply cord. If the cord is damaged,
switch off the appliance and have a quali-
fied technician change the cord.
If no longer using the appliance, we
recommend making it inoperative; after
removing the plug from the mains elec-
tricity, cut the power supply cable.
CAUTION
RISK OF POLLUTION
Do not dispose of the machine in the
environment: to dispose of the machine,
use an authorised centre, or contact the
manufacturer for relative information.
All manuals and user guides at all-guides.com
Fig. 8
To ensure that the machine is properly
ventilated, place it with the ventilation
side at a distance of 15 cm (5,9 in) from
walls or other objects.
Once a machine wash cycle has been
started, do not interrupt it, as detergent
residues may then be left inside the deliv-
ery group.
CAUTION
RISK OF INTOXICATION
Use the steam nozzle with care and never
place hands below the jet of steam. Do
not touch the nozzle immediately after
use.
CAUTION
RISK OF BURNS OR SCALDING
We remind you that before carrying out
any installation, maintenance, unloading
or adjustment operations, the qualified
operator must put on work gloves and
protective footwear.
CAUTION
RISK OF CUTTING
When adding coffee beans, the machine
operator must not place his/her hands
inside the container.
Fig. 9
Fig. 10
41
Publicidad
