Descargar Imprimir esta página

Programming; Entering The Programming Mode; Programming In User Mode; Programming In Service Engineer Mode - Nuova Simonelli TALENTO Manual De Instrucciones

Ocultar thumbs Ver también para TALENTO:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

7.

PROGRAMMING

7.1
ENTERING THE
PROGRAMMING MODE
Hold down the ON/OFF
machine switched off (approx. 5 seconds) until the
display shows the first programming function:
LANGUAGE
The keys available during the programming stage
are:
ENTER key:
To enter the menu and/or
confirm the setting.
CURSORI keys:
RESET keys:
To go back to the previous
step.
LIST OF PROGRAMMABLE FUNCTIONS
Functions that can be accessed from the USER and
TECHNICIAN modes.
1.
LANGUAGE (LANGUAGE SELECTION)
Functions that can "ONLY" be accessed from the
TECHNICIAN mode.
2.
COUNTERS
3.
PROG DOSES
4.
SETTINGS
5.
SAVE DATA
48
All manuals and user guides at all-guides.com
key with the
To scroll through the
menu and increase/
reduce settings.
7.2
PROGRAMMING IN
USER MODE
1 . LANGUAGE
Press the
required language.
The possible languages are as follows: ENGLISH,
ITALIANO, FRANCAIS, DEUTSCH, ESPANOL.
onfirm your selection and move to the next function
by pressing ENTER
7.3
PROGRAMMING IN
SERVICE ENGINEER MODE
To access the functions that can only be programmed
in SERVICE ENGINEER MODE, press the up arrow
key
from the SELECT LANGUAGE menu
and the display will read as follows:
PASSwORD
Enter the correct password to access the first item
on the programming menu that can be accessed in
SERVICE ENGINEER MODE.
The default PASSWORD setting is 4 times the LEFT
GRINDER key:
2.
COUNTERS
Pressing the ENTER
enter the submenu.
2.1 DRINK COUNT
(Beverage count)
Press ENTER
to enter the sub menu; all of
the beverage keys (1-10) will start to flash.
EN
keys to select the
.
key it is possible to

Publicidad

loading