Changing The Password; Special Machine Scaling Functions; Reset Data; Test - Nuova Simonelli TALENTO Manual De Instrucciones

EN
Press ENTER
to confirm the setting.

4.18 CHANGING THE PASSWORD

It is possible to set a new password to access the
programmable functions in technical mode.
Pressing ENTER
sub menu.
Enter the new password using a combination of 4 keys:
NEW PASSWORD XXXX
Confirm the password set previously:
CONFIRM PASSWORD XXXX
5. SAVE DATA
Pressing ENTER is possible to store all data
set during the programming stage in the machine's
memory. Pressing RESET
quit the programming mode without saving.
All manuals and user guides at all-guides.com
it is possible to enter the
it is possible to
8. SPECIAL MACHINE
SCALING FUNCTIONS
This operation may only be performed by a Specialist
Technician.
8.1

RESET DATA

With this function it is possible to remove incor-
rect operating data and to return to Standard
Programming settings (see PRESET VALUES).
To reset the machine parameters and return to
standard settings, with the machine switched off,
OFF, hold down the three keys:
, ENTER and RESET
8.2

TEST

To check machine charges, solenoid valves, heating
elements and motors, with the machine switched
off, OFF, hold down the,
8 seconds.
1
KEY
1 DATA RESET
2 TEST
for 8 seconds.
, keys for
2
Fig. 22
Fig. 21
57