EN
2.10 CLEARING (Total wash cycles)
Press ENTER
to enter the sub menu: all of
the beverage keys (1-8) will start to flash and the
display will read:
CLEANING
N. 000000056
Press and hold down ENTER
to read the absolute total (not resettable to zero):
CLEANING
ABSOLUTE TOT
N. 00000056
Press and hold down ENTER
from the total absolute menu to reset the CLEARING
counter.
Press RESET
to quit the submenu.
Press RESET
to quit the submenu.
3.
PROG DOSES (Dose programming)
Pressing ENTER
it is possible to access the
sub menu and then to use the
to select the key to be programmed. The numbers,
from 1 to 10 are shown in fig.1
1
2
3
4
5
All manuals and user guides at all-guides.com
Press ENTER
programming mode for each single key. Use the
DISABLE: key disabled
COFFEE: coffee cycle
MILK COFFEE: milk cycle + coffee cycle
COFFEE MILK: coffee cycle + milk
CAFFELATTE: milk cycle + coffee together
for 10 seconds
MACCHIATO: milk cycle + pause (3 seconds) + coffee
MILK: milk cycle
TEA: pours hot water
MANUAL STEAM: timed steam delivery
AUTOSTEAM: steam delivery with temperature
probe
for 6 seconds
Press ENTER
age.
List of functions that can be programmed for the
COFFEE beverage:
keys
List of the functions that can be programmed for the
MILK COFFEE beverage:
6
7
8
9
10
Fig. 21
again to enter the function
to select the required beverage:
to confirm the required bever-
• GRIND TIME (used to set the grinding time)
• GRIND SEL (used to set the default grinder)
• VOLUME CC (used to set the volume of water
in the coffee)
• PRE-BREWING (used to set the pre-brewing time)
• TAMPING (used to enable/disable pressing)
• ADD WATER (used to set the amount of addi-
tional hot water)
• MILK TIME (used to set the milk time/amount)
• NO AIR TIME (used to set the milk time/amount
without foam)
• AUTOWASHING (used to set the washing time
at the end of pouring)
• GRIND TIME (used to set the grinding time)
• GRIND SEL (used to set the default grinder)
• VOLUME CC (used to set the volume of water
in the coffee)
51