Descargar Imprimir esta página

Residual Risks; Warning Labels Applied To The Machine - Fiorenzato All Ground Manual De Instalación, Uso Y Mantenimiento

Publicidad

Idiomas disponibles

Idiomas disponibles

EN

3.5 Residual risks

During the design, Fiorenzato M.C. S.r.l. adopted all the necessary precautions to ensure use of
the coffee grinder in conditions of maximum safety. However, during installation and cleaning of the
appliance, there are a number of residual risks that cannot be eliminated, the effects of which can
be addressed by adequately training the user according to the provisions set out in the following
table.
For each residual risk, the provisions useful to limit and/or cancel the degree of the individual risks
are indicated.
Residual risk
Contusion and/
or crushing of the
upper and lower
limbs due to the
weight of the device
Electrocution
Excoriation/cuts to
the fingertips and
fingers

3.6 Warning labels applied to the machine

Special pictograms (Fig. 9) have been applied to the grinder to warn the user to pay the utmost
attention when performing certain actions and operations on the machine. The pictograms are:
1.
Cutting hazard: applied to the outer surface of the removable chamber (visible only after
removing the chamber itself from the machine body);
2.
Electrocution Hazard: positioned on the closing plate on the bottom of the grinder, near the
cable gland.
38 / 102
Present during:
Handling of the device for:
Unpacking.
Installation.
Movement of the
appliance for cleaning
of the relative support
surface.
Connecting and
disconnecting the power
cord.
Handling of the
removable chamber.
Cleaning of the grinders.
Provisions to reduce the risk
Firmly grip the appliance before
moving it.
Ensure there is sufficient space to
move the appliance safely without
striking obstacles.
Use non-slip gloves to move the
grinder.
Frequently check the condition
of the power cable and replace it
when it is found to be deteriorated
or damaged.
Make sure that the switch is in
the "O" (OFF) position before
connecting the power cable to the
coffee grinder.
Handle the removable chamber
carefully when removing/inserting it
from/into the machine body.
Avoid direct contact of your fingers
with the sharp teeth of the grinders
during cleaning.
Use rubber gloves to protect
hands.
Fiorenzato | Cod. AllGround_001 Ed. 01/2021

Publicidad

loading