EN
"Moka" Screen (Fig. 18)
This screen is displayed when the adjustment ring nut is rotated to the "Moka" grinding mode and
contains the function button for starting the grinding cycle.
"Moka" grinding (Item 1):
- By pressing and holding this function button (Item 1) the grinding cycle starts. The grinding time
is displayed at the top of the display (Item 2). When the button is released, the grinder stops.
"Filter" screen (Fig. 19)
This screen is displayed when the adjustment ring nut is rotated to the "Filter" grinding mode and
contains the function button for starting the grinding cycle.
"Filter" grinding (Item 1):
- By lightly pressing this function button (Item 1) the grinding cycle starts in continuous mode.
The grinding time is displayed at the top of the display (Item 2).
- By pressing the button again (Item 1) the grinding in progress stops.
The "Filter" mode grinding cycle is automatically stopped after 50 seconds of operation.
"WARNING" screen (Fig. 20)
This screen is displayed when the adjustment ring nut (Item 1) is released from its relative guide
and removed from the machine body in order to clean the removable chamber and the grinders.
The appearance of this screen prevents the grinder from starting until the adjustment ring nut is
reset to the correct working position.
5.3.3
Single and double "Espresso" dose grinding times
The
grinder management software lets you adjust the duration of the grinding cycles
(expressed in seconds) to grind and dispense single and double doses of coffee in the "Espresso"
operating mode.
To set the grinding times, make sure that the adjustment ring nut is rotated to "Espresso" and that
the relative management screen is displayed, then follow the instructions below:
> 2 s
From the "Espresso" screen,
press the
button for
longer than 2 seconds.
42 / 102
Single dose dispensing time setting
Use the function buttons
" - " and " + " to set the
grinding duration.
Press "OK" to confirm
the data and return to the
"Espresso" screen.
Fiorenzato | Cod. AllGround_001 Ed. 01/2021
1,4