Publicidad
Idiomas disponibles
Idiomas disponibles
5.3.1
Switch
It is used to turn the appliance on and off (Fig. 15).
•
Rotated to "OFF": the appliance is switched off (power supply disconnected).
•
Rotated to "ON": the appliance is on (electrically powered).
5.3.2
Machine management function screens and buttons
The display is the communication interface between the appliance and the user and shows the
specific machine management screens based on the type of grinding selected by the adjustment
ring nut.
Start-up screen (Fig. 16)
When the grinder is switched on (the switch is in the "ON" position), the display shows the start-up
screen with the grinder logo for a few seconds (Item 1), the version of the software installed (Item
2) and a "QR" code with the manufacturer's logo (Item 3).
By scanning the "QR" code with an enabled smartphone you can connect to the Fiorenzato M.C. S.r.l.
website and watch an explanatory video on how to operate your
After the set display time has elapsed, the display automatically shows the machine management
screen relating to the grinding mode set at that time with the adjustment ring nut (Espresso, Moka
or Filter).
"Espresso" screen (Fig. 17)
This screen is displayed when the adjustment ring nut is rotated to the "Espresso" grinding mode
and contains the three function buttons for starting the desired grinding cycle. Specifically:
Single dose grinding (Item 1):
- Lightly pressing this option (for less than two seconds) will set the grinder time to grind
enough coffee for a single dose. When the command is given, a screen appears showing
the progress of the grinding cycle expressed in seconds and the "STOP" button to interrupt
the current cycle (see paragraph 5.6).
- If pressed for longer than two seconds, the screen is displayed to set the time for a single
dose (see paragraph 5.3.3).
Double dose grinding (Item 2):
- Lightly pressing this option (for less than two seconds) will set the grinder time to grind
enough coffee for two doses. When the command is given, a screen appears showing the
progress of the grinding cycle expressed in seconds and the "STOP" button to interrupt the
current cycle (see paragraph 5.6).
- If pressed for longer than two seconds, the screen is displayed to set the time for a double
dose (see paragraph 5.3.3).
Manual grinding (Item 3):
- When pressed and held, manual grinding begins and the display shows the grinding time
expressed in seconds. When the function button is released, the machine stops.
When grinding is completed, the display returns to the "Espresso" screen.
Fiorenzato | Cod. AllGround_001 Ed. 01/2021
EN
grinder.
41 / 102
Publicidad
