BIG ASS FANS HAIKU R Guia De Instalacion página 11

2. Install downrod
No Uplight
If not installing an uplight, align holes on downrod with holes on motor bracket. Position
downrod wiring harness so that it is on the same side of the motor shaft as the motor
unit wiring harness. Position ground wire and safety cable so that they are on the
opposite side of the motor shaft as the motor unit wiring harness. Secure downrod with
the lower mounting hardware (Fig. 2a).
Fig. 2a
M6 x 32 mm Bolt
Motor Unit Wiring
Harness
Uplight
Align holes on downrod with holes on motor bracket. Position downrod wiring harness,
ground wire, and safety cable so that they are on the opposite side of the motor shaft
as the motor unit wiring harness. Secure downrod with the lower mounting hardware
(Fig. 2b).
Fig. 2b
M6 x 32 mm Bolt
Downrod Wiring
Harness
Motor Unit Wiring
Harness
UNIVERSAL MOUNT INSTALLATION
Ground Wire and
Downrod Wiring
Harness
Ground Wire and
Safety Cable
M6 Nut
Safety Cable
M6 Nut
9