Universal Mount Installation - BIG ASS FANS HAIKU R Guia De Instalacion

UNIVERSAL MOUNT INSTALLATION

For Low Profile Mount installation, see page 24.
Install fan stabilizer in covered outdoor locations on flat ceilings only.
An EMI filter (not shown) is included for certain regions and fan
diameters. If the EMI filter is included, install it with your fan.
The lower cover is shipped attached to the motor unit to protect the
fan's internal electronics during installation.
Wire Connectors
(Optional, indoor fans only)
6
Mounting Bracket
Fan Stabilizer,
M6 x 70 mm Bolt,
M6 Nut
(Included only with
damp-rated fans.)
(4) M4 x 6 mm Screws
Wiring and Safety Cable
M6 x 32 mm Bolt
Uplight
Wiring Cover
(6) M5 Screws
Lower Cover
4 mm Screw, Wedge,
Mounting Ball
Canopy
6 mm Steel Pin
Downrod
M6 Nut
Motor Unit
(3) Airfoils
(6) Grommets
OR Downlight
(Optional)