Biochef Aurora Manual De Usuario página 13

2. Please remove any unwanted fruit and vegetable skin before placing them
into the jug.
3. Do not put your hands or sharp objects into the jug if the blender is
connected to a power source to avoid any injury or damage to the product.
How to clean a burned base in the glass jug:
1. Pour 100ml vinegar and 100ml water into the glass jug.
2. Use the "CONGEE" program to heat up diluted vinegar in the jug and allow
it to come to a boil.
3. After it boils for a minute, stop the program by pressing "START/STOP" and
drain the vinegar down the sink.
4. If there are still burn marks left, cut a standard kitchen sponge into a small
square to reach the base of the jug and use the scourer to clean the marks.
Modus: VACUUM
1. Please use the vacuum jug for the "Vacuum" function. Add all ingredients
and the necessary amount of liquid to the jug and ensure that both lids are
firmly in place and tightly sealed.
2. Place the jug onto the base and insert the power plug into the power outlet.
You will hear a beeping sound and the display will illuminate.
3. Press the "VACUUM" button and the display will show 1 min. Press the
"START / STOP" button to start the program.
4. When you have finished blending, switch off the blender at the plug or pull
the power plug from the power outlet.
5. Before opening the lid, lift up the lid valve to release pressure. The jug lid
can then be easily opened for you to enjoy the finished product.
6. To store and preserve the contents, place the jug into the refrigerator and
only open the valve directly before consumption. Let the air escape and
serve the finished product.
Mode: PULSE/CLEAN
Use the glass jug as well as the vacuum jug for this function. Fill the blending
jug with ingredients and place it onto the basis. Press and hold the "PULSE/
CLEAN" button as needed or in intervals until the content is the desired
consistency. The pulse mode always operates at maximum speed.
EN
13