Cleaning - Biochef Aurora Manual De Usuario

Cleaning

After finishing your blending session, you can clean the jug in various ways
depending on the ingredients you have used.
• For thick or oily ingredients, add warm water to the jug with a few drops of
detergent. Place jug into main unit. Press ON | OFF to activate the blender.
Press and hold the PULSE/CLEAN button and continue to press until jug
looks clean. Pull the power plug from the power outlet. Remove the jug
and rinse with clean water. Wipe the main unit with a wet or dry cloth.
• Rinse the jug and lid directly under the tap and use a clean cloth to wipe
up the residual water.
•
Please dry inner base of the jug with a kitchen towel and place jug in
upright position when leaving to dry. Try not to have liquid contacting
the underside of the drive shaft.
• To remove burn marks from the base of the glass jug, add a 1:1 mixture
of hot water and vinegar essence to the jug and use the PULSE/CLEAN
function for 1 minute. Subsequently cut a kitchen sponge into a small
rectangle and use the rough side to remove the marks.
EN
15