Ac Power Cord - Teac DR-L700 Manual Del Usuario

MD, CD-R, etc.
DIGITAL DIGITAL
IN OUT
A
R L
LINE IN
TAPE
24
B
R L
LINE OUT
C
Connection 4
Connection to an audio component
A
DIGITAL IN/OUT terminal
If the component has an DIGITAL IN terminal,
connect them with an optical cable.
DIGITAL OUT (DR-L700)
q DIGITAL IN (CD-R, MD, etc.)
DIGITAL IN (DR-L700)
q DIGITAL OUT (CD-R, MD, etc.)
< Select the proper digital output mode in
accordance with your connection. (see page 100)
< When using DIGITAL OUT terminals, remove the
caps from the terminals. When you do not use
them, leave the caps in place.
B
AUDIO IN/OUT jacks
Analog 2-channel audio signal is input or output
from these jacks. Connect the component with an
RCA pin cable.
Make sure to connect :
white plug q white jack (L: left channel)
red plug q red jack (R: right channel)
< If you don't have speakers and want to hear sound
from a TV, connect the TAPE REC jacks (or
MD/CD-R REC jacks) to the LINE IN jacks of TV.
C

AC Power Cord

When all the connection has been finished, plug
the AC power cord into an AC wall socket.
ENGLISH