Publicidad
1
2
3
4
5
50
Balancing relative volume between
DVD
TEST TONE
speakers using Test Tone
The test tone function is useful to adjust the relative
VOLUME/CONTROL
volume between speakers.
Once the balance is set, you don't have to change the
balance as long as the speakers aren't moved.
< It is also possible to adjust the relative volume during
< Use the remote control from your listening position.
1
2
< If certain speakers are not being used, (for example,
3
4
< The level can be adjusted in 1 dB steps from -10 dB
5
Speaker Configuration 4
playback of DVD. See 52 page for details.
Press the DVD button.
When other function is selected, the TEST TONE
button will not work.
Press the TEST TONE button.
The test tone is emitted from each speaker in the
following order at 4-second intervals.
FL(Front Left)
C(Center)
SL(Surround Left)
no center speaker) the noise sequencer will
automatically skip over that channel.
Adjust the master volume to the normal listening
level.
Adjust the volume of each speakers so that the test
tone from each speakers sounds same.
The level of the speaker which is emitting the test
tone can be changed by pressing the
to +10 dB.
When the setting has been finished, press the TEST
TONE button to stop the test tone.
ENGLISH
FR(Front Right)
SR(Surround Right)
/
buttons.
5
b
Publicidad
Solución de problemas
