Publicidad
FRONT
SPEAKER
A
B
26
FRONT
SPEAKER
Connection 5
Speaker Connections
Caution:
To avoid damaging the speakers with a sudden high-
level signal, be sure to switch the power off before
connecting the speakers.
Check the impedance of your speakers. Connect
speaker with an impedance of 6 ohms or more.
The red speaker terminals are + (positive), and the black
terminals are - (negative).
The + side of the speaker cable is marked to make it
distinguishable from the - side of the cable. Connect this
marked side to the red + terminal and the unmarked
side to the black terminal.
Prepare the speaker cords for connection by stripping
off approximately 10 mm or less (no more as this could
cause a short-circuit) of the outer insulation.
Twist the wires tightly together so that they are not
straggly :
A
How to connect
1
Turn the terminal cap counterclockwise to loosen it.
The speaker terminal caps cannot be fully removed
from the base.
2
Insert the wire into the terminal fully and turn the
terminal cap clockwise to securely connect it :
3
Make sure it is fastened firm by pulling the cable
lightly.
ENGLISH
B
Publicidad
Solución de problemas
