Installing The Air Filter And Filter Cap; Connecting To Power - BMC RESmart GII CPAP System Manual Del Usuario

11.2 Installing the Air Filter and Filter Cap

(1) Attach the air filter to the filter cap, as shown in Fig. 11-1.
(2) Install the filter cap containing the air filter to the main device, as shown in Fig. 11-2.
CAUTION!
• The air filter must be in place when the device is operating.

11.3 Connecting to Power

(1) Insert the plug of the power adapter into the DC Inlet on the back of the device;
(2) Connect the power cord to the power adapter;
(3) Plug the other end of the power cord into the power outlet.
WARNINGS!
• The device is powered on for use when the power cord and power adapter is connected. The
Knob turns the blower On / Off.
• Use of the device at an AC voltage beyond the stated range (see Section 5 "AC Power
Consumption") may damage the device or cause device failure.
E-20C-H-O / E-20CJ-H-O User Manual V2.3
Air Filter Filter Cap
Fig. 11-1
Fig. 11-2
DC Inlet
Power Adapter
Power Cord
Fig. 11-3
10 / 35
Main Device