Manitowoc LuminIce II Manual De Instalación, Operación Y Mantenimiento página 16

Installation
NOTE: The bulb and bulb wiring must face
toward the top of the ice machine to allow
bulb replacement with LuminIce® in place.
5. Attach LuminIce® assembly to corner
post with two screws.
16
6. Refer to picture and install LuminIce®
hoses.
NOTE: Proceed to the next step for your
specific LuminIce® kit number. Installation
varies depending on whether power for the
LuminIce® is supplied by the control board
or a switching power supply needs to be
installed.
Part Number: 000014110 Rev 01 1/19
Section 2