Information And Safety Instructions For The; Responsible Body; Requirements For The Responsible Body; Using The Machine - Orbitalum RPG 3.0 Traducción Del Manual De Instrucciones Original

eNGLISH
Information and safety instructions for the responsible body
2. INFORMATION AND SAFeTY INSTRUcTIONS FOR
THe ReSPONSIBLe BODY
2.1

Requirements for the responsible body

Workshop/outdoor/field application: The responsible body is responsible for safety in the danger zone around the
machine, and should allow only qualified personnel to enter the zone or operate the machine in the danger zone.
employee safety: The safety regulations described in chap. 2 must be observed and work must be carried out with safety in mind
using the prescribed protective equipment.
2.2

Using the machine

2.2.1

Proper use

• The machine must only be used for squaring or beveling of pipes made of materials and pipe
dimensions, as listed in chap. 4.2, p. 51 .
• Only use dimension-specific clamping shells by Orbitalum Tools GmbH to fixate the pipes.
• The machines must only be operated using the voltage levels specified on the drive identification
plate and in the "technical data", chap. 5, p. 52).
• Only the RPG20 motor (Code 790 038 190 to 790 038 192) should be used as the drive for the
electrical variant.
• The drive motor may only be used in connection with the machine.
• The machine may only be used on tubes and containers that are empty, unpressurized, do not
have explosive atmospheres and are not contaminated.
Proper use also includes the following:
• Observing all safety and warning information in these operating instructions and general safety instructions
(code 790 036 770)
• carrying out all inspection and maintenance work
• sole use in the original condition with original accessories, spare parts and materials
• processing only materials set out in the operating instructions.
40
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
RPG 3.0, RPG 4.5 (S), RPG 8.6
[REV. 20210302] OC_RPG_L_BA_790038761_01__INH-02_EN