Accessories; Multifunctional Tool (Mfw); Tool Holder (Wh) For Beveling And Squaring; Clamping Shells - Orbitalum RPG 3.0 Traducción Del Manual De Instrucciones Original

eNGLISH
Product design
3.4

Accessories

WARNING!
NOTe!
3.4.1

Multifunctional tool (MFW)

1 multifunctional tool (MFW) (Code 790 038 314) is included with standard supply.
Two-sided tool bit with high-performance Balinit
Usable for all machines of the RPG series.
ARTIcLe
Multifunctional tool MFW-P-2
Multifunctional tool MFW-P-2
Torx screw
3.4.2

Tool holder (WH) for beveling and squaring

1 tool holder (WH) (Code 790 038 320) is included with standard supply.
Fits multifunctional tool 790 038 314. Incl. Torx fixing screw.
Beveling with the RPG 4.5 S is not recommended.
ARTIcLe
Tool holder WH12-I
Tool holder WH12-V-30°
Tool holder WH12-V-35°
Tool holder WH12-V-45°
Tool holder WH12-U-20°
3.4.3

clamping shells

Cannot be used with the RPG 4.5 S. For deformation-free clamping of tubes.
Extremely resistant. Ensures precise clamping of tubes and rapid clamping shell change without tools.
Please see our current product catalog for a selection of clamping shell dimensions with code numbers.
3.4.4

Warning symbols

Overview of warning symbols with order numbers, see chap. 2.5, p. 46.
50
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
Danger presented by using poor­quality accessories and tools not approved
by Orbitalum Tools!
Diverse physical injuries and material damage.
X Use only original tools, spare parts, materials and accessories from Orbitalum Tools.
Please check the outer diameter of the tubes before ordering the clamping shells. The different
standards sometimes involve a special size (particularly for tubes in accordance with DIN 2430).
Futura protective coating against tool wear.
®
SQUARING BeVeLING BeVeLING ANGLe
x –
– x
– x
– x
– x
QTY. cODe
1 790 038 314
10 790 038 315
1 790 086 220
cODe
[°]
– 790 038 320
790 038 329
30
35 790 038 282
45 790 038 280
20 790 038 326
RPG 3.0, RPG 4.5 (S), RPG 8.6
[REV. 20210302] OC_RPG_L_BA_790038761_01__INH-02_EN