Publicidad
Idiomas disponibles
Idiomas disponibles
FINISHING THE INSTALLATION
Step 1. Tuck all the connections neatly into the ceiling outlet box.
Step 2. Slide the canopy up to the mounting bracket and place one of
the key hole slots over the mounting screw on the mounting bracket.
Rotate the canopy until the screw head locks in place at the narrow
section of the key hole. (Fig.14)
Step 3. Align the remaining circular hole on the canopy with the
remaining hole on the Ceiling Mounting Bracket. Insert and tighten
the mounting screw you removed earlier and the mounting screw
from step 2 above. Now, attach the canopy cover to the mounting
screw heads by inserting the screw heads into the bottom side of the
canopy cover and rotating the cover clockwise.
NOTE: Adjust the canopy screws as necessary until the canopy
and canopy cover are snug.
WARNING: Make sure the "Check Tab" at the bottom of the
hanger bracket is properly seated in the "Registration Slot" on
the side of the hanger ball before attaching the canopy to the
bracket. Failure to properly seat the "Check Tab" could damage
the electrical wires when the ceiling fan blade direction is changed
while the fan is running.
14
| KICHLER.COM
Outlet box
Ceiling
mounting
bracket
Screw
Screw
Canopy
Canopy
cover
Fig. 14
Publicidad
Solución de problemas
