Finishing The Motor Installation - Kichler 330160 Manual De Instrucciones

FINISHING THE MOTOR INSTALLATION

Standard Ceiling Installation
Step 1. Tuck all the connections neatly into the ceiling outlet box.
Step 2. Slide the canopy up to ceiling and attach the canopy to the
ceiling mounting bracket using 4 screws at the top edge of the mounting
bracket. Insert each screw through the canopy mounting hole and into
the mounting bracket. Tighten all screws securely. (Fig. 12)
Close-to-Ceiling Ceiling Installation
Step 1. Tuck all the connections neatly into the ceiling outlet box.
Step 2. Remove the fan from the hook on the ceiling mounting
bracket. Attach the fan assembly to the ceiling mounting bracket
using 4 screws at the top edge of the mounting bracket.
Align the keyhole slots on the canopy with the mounting screw
heads on the sides of the mounting bracket. Lift up and turn the fan
assembly until the heads of the mounting screws are in the narrow
end of the keyhole slots.
Step 3. Make sure all four mounting screws are tight. (Fig. 13)
Ceiling mounting
bracket
Ceiling mounting
bracket
Screws & Washers
Decoration ring
Canopy
Fig. 12
Screw & Washer
Hook
Decoration ring
Canopy
Fig. 13
13
52" Renew |