Glowforge Pro Guia Del Usuario página 45

● Hold the mirror by the handle and gently
slide it into the notch with the mirror at
a 45 degree angle to the top of the
Printer Head.
Set the mirror gently back into the notch so that
the Glowforge logo on the handle faces up and
is parallel to the floor. It will rest softly in place -
there is no need to push it in.
The mirror handle should look like this:
Tap the blue handle once. This will help ensure
that the mirror is resting properly in place.
Replace the top of the printer head.
Close the lid of your Glowforge and turn it on.
Copyright Glowforge, Inc. 2019
45