Glowforge Pro Guia Del Usuario página 50

Moving Your Glowforge
Moving to a new Wi-Fi network
Using a device that connects to the internet via
Wi-Fi, go to ​ s etup.glowforge.com​
Turn on your Glowforge and wait until all motion
has stopped for 30 seconds.
Hold down the button on your Glowforge for ten
seconds, until it glows with a teal color.
Follow the instructions on screen to connect your
Glowforge to Wi-FI.
Packaging Your Glowforge
Whether it's for a big move, taking your Glowforge to an event, or for any warranty repair, you'll need
to package your Glowforge properly with the original boxes, foam blocks, and important orange and
red bits. The box is specially designed to protect your Glowforge through all shipments, domestic and
international. Leaving out any pieces can endanger your Glowforge. For example, if you move your
Glowforge without the red knobs that lock the laser arm in place, you might break the laser tube.
Should you need to purchase a replacement shipping box for $249, contact ​
Power Off and Unplug Your Glowforge
Always turn your Glowforge off before packaging any part of your unit. Unplug your unit and set the
power cord aside.
Remove the Printer Head
Position the Laser Arm
Gently push the laser arm to the back of the
Glowforge
Remove the Printer Head
Holding only the finished black surfaces, ​ g rasp the
printer head as shown. Pull gently up and back to
disengage the magnets and remove the head.
Copyright Glowforge, Inc. 2019
and sign in.
s upport@glowforge.com​
50
.