Publicidad
Idiomas disponibles
Idiomas disponibles
BOOSTER MODE INSTALLATION
Reclining the Seat in
Push the recline button on
either side of the base and
rotate the child restraint to
position "B". Recline indicator
does not need to be used in
BOOSTER
mode.
IMPORTANT:
Recline MUST
be in position "B" when seat
is used in
BOOSTER
mode.
Infant Insert Pillow
The infant insert can be used with
infants weighing 20 lb (9.1 kg) or
less. Do not use with infants more
than 20 lb (9.1 kg).
Headrest Cover
The headrest cover must be
unfolded for infants weighing
20 lb (9.1 kg) or more.
Cup Holders
The cup holders are removable
and dishwasher safe.
• To remove, grasp the top lip,
twist 90 degrees and pull up
and away from the seat.
• To insert, line up the tabs on
the cup holder to the slots on
the seat, and insert inside.
Twist 90 degrees.
16
Table of Contents
BOOSTER
Mode
B
B
Anti-Rebound Bar (ARB)
In the event of a crash, the anti-rebound bar is designed to
help prevent rebound rotation in REAR-facing car seat
installations.
Installing the Anti-Rebound Bar
WARNING!
The anti-rebound bar is not intended for use as a carry
handle. Do not use the anti-rebound bar to carry this
child seat.
IMPORTANT:
The anti-rebound bar MUST be removed for
FORWARD-facing installation.
1. Open the CLICKTIGHT.
Squeeze the CLICKTIGHT
release buttons underneath
the front cover flap and lift to
open.
2. Insert the anti-rebound
bar into the two
openings at the front of
the seat.
3. Attach elastic bands
from the cover to the
hooks on the shell.
4. Pull the anti-rebound bar
away from child restraint
on both sides to confirm
connections.
Removing the Anti-Rebound Bar
1� Open the CLICKTIGHT.
2� Unhook elastic bands from
the front of the seat.
3. Push the inner red button.
Pull the anti-rebound bar
away on one side. Repeat
on the other side.
Table of Contents
(For models with anti-rebound bar)
PUSH
17
Publicidad
