VALBERG 3S58 F WAD929C Instrucciones De Uso página 11

B
Electrical Connection
Ensure the voltage and frequency of the power being corresponds to those on the rating
plate. Only insert the plug into an electrical socket which is earthed properly. If the electrical
socket to which the appliance must be connected is not appropriate for the plug, replace the
socket, rather than using a adaptors or the like as they could cause overheating and burns.
WARNING
Ensure that proper earthing exists before use
Water Connection
• Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure
that it is fastened tightly in place.
• If the water pipes are new or have not been used for an extended period of time, let the
water run to make sure that the water is clear and free of impurities. If this precaution is
not taken, there is a risk that the water inlet can get blocked and damage the appliance.
NOTE
If the supplied hose cloes not fit your tap, please contact your
local plumbing supply center where adapters are available
for purchase.
Using the appliance
9 EN