MENZER MENZER MENZER MENZER
5.5 Wet vacuuming
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
• WARNING – Never use the device for the vacu-
uming of flammable, explosive or acidic liquids!
MENZER MENZER MENZER MENZER
• The fleece filter bag (F) must be removed before
MENZER MENZER MENZER MENZER
wet vacuuming. Please read Chapter 6.3 – Fleece
filter bag replacement.
MENZER MENZER MENZER MENZER
• Ensure a correctly installed, intact and – where
possible – clean cartridge filter before you begin
MENZER MENZER MENZER MENZER
working (B 11).
• Ensure that any construction dust is removed
MENZER MENZER MENZER MENZER
from the industrial vacuum cleaner before com-
mencing with wet vacuuming, as the industrial
MENZER MENZER MENZER MENZER
vacuum cleaner can otherwise be damaged
long-term.
MENZER MENZER MENZER MENZER
• ATTENTION – The vacuum cleaner is not suitable
for the vacuuming of coolants or greases, as well
MENZER MENZER MENZER MENZER
as any type of foams.
• Switch on the vacuum cleaner (switch position
MENZER MENZER MENZER MENZER
I – see page *10* – Illustration 12b.). Please read
Chapter 5.7 – Working with add-ons, e.g. power
MENZER MENZER MENZER MENZER
tools when operating the device with add-ons.
• Switch off the vacuum cleaner immediately if any
MENZER MENZER MENZER MENZER
liquid or foam is expelled from the housing. Please
read chapter 7 – Error handling and troubleshoot-
MENZER MENZER MENZER MENZER
ing.
• ATTENTION – The vacuum cleaner must not be
MENZER MENZER MENZER MENZER
tilted during wet vacuuming operation or work
interruption.
MENZER MENZER MENZER MENZER
• Wet vacuuming will be stopped by a stop cock
float as soon as the max. container fill level is
MENZER MENZER MENZER MENZER
reached. The container must therefore be emptied
when vacuum performance decreases or latest
MENZER MENZER MENZER MENZER
when the max. permissible container fill level (C
01) is reached. Please read Chapter 6.2 – Container
evacuation when wet vacuuming.
MENZER MENZER MENZER MENZER
Caution! Press the semi-automatic Filter
Refresh function button (B 02 – see page
MENZER MENZER MENZER MENZER
*10* – illustration 13a.) 3 times for 10 seconds
each time to clean the cartridge filter (B 11) at the
MENZER MENZER MENZER MENZER
end of the work day or when taking an extended
break.
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
10 GB
• Please read Chapter 6.2 – Container evacuation
when wet vacuuming – at the end of your work day
and clean the waste container as described in the
manual.
5.6 Blow function (see page *6*)
• WARNING – Do not use the blow function in
enclosed spaces.
• The vacuum cleaner features a blow function to
blow out hard to reach locations, to dry off wet
surfaces and to gather lightweight, blowable and
non-hazardous materials.
• To use the blow function, do not attach the
suction hose to the suction hose connector at the
front, but to the blow function connector at the
rear of the suction head instead. (Figures 4a.–4b.).
• Use a clean hose for the blow function.
• Do not allow the blown out air to escape uncon-
trolled into the room.
• Due to the potential danger posed by health-
hazardous dust types, all persons in the vicinity
of the work area must wear personal protection
equipment. Wear protective goggles and a protec-
tive mask (min. P2 respiratory mask)!
• Do not use the blow function if you suspect
health-hazardous dusts in the vacuum cleaner, in
the suction hose or in the work area, or if you are
aware of their presence.
5.7 Working with add-ons, e.g. power tools (see
page *10*)
• CAUTION – Only connect add-on devices to the
power socket on the vacuum cleaner that match
the permissible target connection values of min.
30 W to max. 2000 W and the stated mains voltage
and mains frequency. (Figures 14a. and 14b.)
• The power socket is designed solely for the pur-
poses described in the operating manual.
MENZER MENZER MENZER MENZER
• Read the operating instructions and the safety
MENZER MENZER MENZER MENZER
instructions contained therein for the add-on
device before connecting it to the vacuum cleaner.
MENZER MENZER MENZER MENZER
• Switch off the vacuum cleaner (switch position
0 – Illustration 12a.) before plugging in an add-on
MENZER MENZER MENZER MENZER
device and ensure that the add-on device is also
switched off.
MENZER MENZER MENZER MENZER
• Select Automatic operation on the vacuum
cleaner (switch position II – Illustration 12c.). You
MENZER MENZER MENZER MENZER
can then activate the add-on device. The vacuum
cleaner will activate automatically.
MENZER MENZER MENZER MENZER
• The vacuum cleaner will automatically deactivate
after a preset delay when the add-on device is
MENZER MENZER MENZER MENZER
switched off.
MENZER MENZER MENZER MENZER
5.8 Antistatic
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
The vacuum cleaner has an antistatic preparation
to prevent sparks and/or power surges in case of
physical contact.
MENZER MENZER MENZER MENZER
The use of the optional antistatic accessory is pre-
MENZER MENZER MENZER MENZER
requisite to full availability of the antistatic system
(see also Chapter 10. Functional accessories and
peripherals).
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
6. Maintenance and service
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
6.1 General information
DANGER – The operator must only carry out
MENZER MENZER MENZER MENZER
simple cleaning, maintenance and care tasks
independently, provided these tasks can be car-
MENZER MENZER MENZER MENZER
ried out without endangering the user or other
people! Example of such tasks are the evacuation
and cleaning of the waste container, replacement
MENZER MENZER MENZER MENZER
of the fleece filter bag and cartridge filter as well as
the external cleaning of the machine housing.
MENZER MENZER MENZER MENZER
The mains plug must be disconnected from the
mains socket before carrying out any work on the
MENZER MENZER MENZER MENZER
device!
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
Do not use water or other liquid cleaning agents,
or care products containing silicone or solvents!
Never submerge the hose in water for cleaning.
We recommend cleaning the device thoroughly
after each use.
Make sure that the ventilation slits in the suction
head are unencumbered and clean at all times!
You can use a dry cloth or a soft brush. We recom-
mend cleaning the device after each use.
The outside of the vacuum cleaner and the inside
of the dust container should be wiped with a moist
cloth regularly and during maintenance.
Check the connection cable, mains plug, ON/OFF
switch and other device components regularly for
visual damage before commencing work and have
them replaced by the MENZER repair service as
needed!
Check the correct position and proper seating of
the fleece filter bag and cartridge filter regularly
before commencing work.
All repairs on the device and any works that entail
opening any of the housing components of the
suction head and its peripherals must be carried
out by the MENZER repair service!
Do not use sharp or pointed utensils for mainte-
nance-related assembly or disassembly tasks.
Clean the maintenance area in such a way as to
exclude any hazardous materials in the immediate
vicinity.
Check the proper seating and integrity of the
fleece filter bag and cartridge filter regularly
before commencing work.
Replace the stated parts as needed in accordance
with the following maintenance notes and only
operate the device after this inspection process is
complete.
This machine must be used with cartridge filters
and fleece filter bags recommended by MENZER
only.
GB 11