Hillrom Ultrafins Stirrups O-UFAS Instrucciones De Uso página 15

INSTRUCTIONS FOR USE
d. Insert blade on the Ultrafin mount into Easy Lock
A-40042, A-40043 or equivalent.
e. Once the stirrup is placed in the rail clamp, tighten handle securely.
WARNING: The handle must be tightened securely before use.
f. To pre-position stirrup boots, loosen
boot-locking mechanism and slide
boot along rod until top end (calf
portion) of
approximately at patient's mid-calf.
Tighten Boot Locking Mechanism
securely.
procedure for the other stirrup.
g. Position stirrups to be level with the
table by squeezing the release
handle and
downward.
Positioning Patients in Stirrups:
a. Ensure patient is positioned on O.R. table in accordance with procedure and
surgeon requirements.
b. Pre-position stirrup boots. Loosen boot-clamping mechanism and slide boot
along rod until top end (calf portion) of boot is approximately at patient's mid-
calf. Tighten clamp.
Note: For Larger Patients, a padded armshield can be used to protect the wrist, hand
and arm
c. Positioning patient should be performed by two staff members. Support each
of the patient's legs by grasping the heel in one hand and the underside of the
knee with the other. Gently flex the knees and simultaneously transfer both legs
into the boots.
Document Number: 80028130
Version: B
boot is located
Repeat above
moving stirrup
Page 15
Blade Clamp A-40040, A- 40041,
®
Issue Date: 06 MAR 2020
Ref Blank Template: Ver. F