Beem Espresso Perfect Crema Plus Manual De Instrucciones página 20

16 EN
Empty the drip tray regularly. If it
►
is full, it is possible that hot water will
squirt out when relieving pressure.
Never take the milk frothing nozzle
►
out of the milk while steam is still being
discharged. Otherwise hot milk can
squirt out. Always switch the selector
switch back to the standby position
before remove the container from the
milk frothing nozzle.
ATTENTION
Do not pull the connecting cable
►
to remove the plug from the mains
socket.
Never lift or move the appliance
►
with the mains cable.
Do not use abrasive cleaning
►
agents or metal brushes, nylon brush-
es or other objects that could scratch
the surface when cleaning the appli-
ance.
Always fill the water tank with cold,
►
clean tap water. Never fill with other
liquids.
Never operate the appliance with-
►
out water, otherwise it will be dam-
aged.
Touching the hotplate can cause
►
burning. The hotplate becomes hot.
A sudden unintentional contact could
lead to further danger.
Descale the appliance regularly.
►
Intended use
This appliance is only intended to be used for
making Espresso as well as frothing milk and
heating drinks for use in the household or
similar, non-commercial establishments such
as staff kitchens in shops, cafés, offices or
other business surroundings; agricultural es-
tablishments; use by guests in hotels, motels
or other residential facilities; bed and break-
fast establishments.
BEEM - Elements of Lifestyle
Any use other than previously stated is con-
sidered as improper use.
WARNING
If not used for its intended purpose and/or
used in any other way, the appliance may
be or become a source of danger.
► Use the appliance only for its intended
purpose.
► Observe the procedures described in
this user manual.
No claims of any kind will be accepted for
damage resulting from use of the appliance
for other than its intended purpose.
The risk must be borne solely by the user.
Requirements for the place of
operation
For safe and trouble-free operation of the ap-
pliance, the installation location must satisfy
the following requirements:
Place the appliance on a firm, dry, flat,
‹
waterproof and heat-resistant surface.
Do not place the appliance in a hot, wet
‹
or very humid environment or in the vicinity of
inflammable materials. There must be a gap
of at least 15 cm between the appliance and
any walls, furniture or other objects.
When operating, do not leave any valu-
‹
able objects sensitive to moisture or heat in
the vicinity of the appliance in order to avoid
damage by hot steam and water.
Never place the appliance or parts of
‹
the appliance in the vicinity of strong heat
sources and hot surfaces (e.g., heating,
oven, grill).
Do not put the appliance underneath a
‹
wall cupboard.