Publicidad
Idiomas disponibles
Idiomas disponibles
BEEM - Elements of Lifestyle
3. Fill the milk container (5) with water up to
the MAX mark.
4. Insert the milk container into the appli-
ance correctly.
5. Put one strainer insert (10 or 11) without
coffee into the holder (15) as described in
the section Installing the strainer insert
(page 22).
6. Put the strainer holder into the appliance.
7. Insert the plug into the mains socket.
8. Switch on the appliance with the ON/OFF
switch (4).
9. Put a suitable cup onto the resting grate
of one of the drip trays (16 or 17).
10. Press and hold down the selector switch
(12) for 3 seconds and allow the water for
one coffee/lungo/diluted black coffee to run
through. When the appliance is new, it can
take a few seconds until the system has filled
with water.
11. For Latte
subsequently press the but-
ton for 3 seconds to rinse the steam nozzle
(6).
12. Repeat the last step with a little coffee
powder in the strainer insert.
13. Use the ON/OFF switch (4) to switch the
appliance off.
14. Allow the appliance to cool down.
15. Clean the appliance and the accessories
as described in the section Cleaning and
maintenance (page 27).
NOTE
►
During the pumping process, unusual
noises may be heard. These noises will
stop after the appliance is filled with water.
►
When using for the first time, it is
possible that production-related additives
such as grease could cause slight odour or
smoke. This is completely normal. Ensure
sufficient ventilation.
All manuals and user guides at all-guides.com
(See illustration on the left fold-out page)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
15a Strainer holder retaining bracket
16
17
18
19
The appliance is equipped with 3 indicator
lamps (12-14).
‹
ance is switched on and heats up.
‹
manently when the heat-up phase is complet-
ed, the appliance is ready for operation and
the milk container is correctly inserted.
NOTE
►
drip out of the strainer insert holder. There-
fore, always insert a drip tray (16 or 17)
and make sure that it does not overflow.
Appliance description
Overview / Delivery contents
Rest/hotplate for cups
Operating panel with 3 indicator lamps
Water tank
ON/OFF switch
Milk container
Steam nozzle
Steam and milk froth regulator
Steam nozzle operating lever
Measuring spoon
Strainer insert (1 cup)
Screen insert (2 cups)
Espresso
,
and
lungo selector switch
Cappuccino
,
Latte selector switch
Latte Macchiato
Clean selector switch
Strainer holder
Large drip tray with resting grate
Small drip tray with resting grate
Strainer holder mounting
User manual (not illustrated)
Indicator lights
All 3 indicator lamps flash when the appli-
All 3 indicator lamps (12-14) light up per-
During the heat-up phase, water can
EN 21
and
and
Publicidad
