Publicidad
4. INSTALLATION STEPS
Power Supply Surface Mount Kit Installation Instructions
Bracket Positions
The mounting brackets can be installed outward or inward. If
installed inward, it may be necessary to first mount the brackets to
the surface.
Bracket Installation
Place one bracket behind the power supply end plate and align the
1
screw holes.
2
Install a screw and washer in each hole and tighten. Ensure the
washer is installed in the correct direction as shown for proper fit
and function. Do not overtighten.
3
Repeat steps 1 and 2 at the other end. Mount the power supply
to the desired surface using suitable hardware for the surface
material, and weight of the power supply.
Surface Bracket Mounting Hole Detail
2" (5.25 mm)
A
0.42" (10.5 mm)
B
0.30" (7.5 mm)
C
Recommended Mounting Positions
Inward
1
B
C
A
Outward
2
17
Publicidad
