Publicidad
4. INSTALLATION STEPS
IMPORTANT: Please be sure to match the EXACT light bar quantity per power supply to the BAR COUNT on Power Supply SKU label for
proper system performance. A differed bar count from SKU label would result in INCORRECT LIGHT OUTPUT from light bars.
IMPORTANTE: Asegúrese de aparear la cantidad EXACTA de barras de luz por la fuente de alimentación con el CONTADOR DE BARRAS en
la etiqueta SKU de la fuente de alimentación para un rendimiento adecuado del sistema. Un recuento de barras diferente al de la etiqueta
SKU daría como resultado una SALIDA DE LUZ INCORRECTA de las barras de luz.
IMPORTANT: Assurez-vous de faire correspondre la quantité EXACTE de barres lumineuses par alimentation électrique au NOMBRE DE
BARRES indiqué sur l'étiquette de référence de l'alimentation électrique pour une performance correcte du système. Un nombre de barres
différent de celui sur l'étiquette de référence entraînerait un FLUX LUMINEUX INCORRECT des barres lumineuses.
POWER SUPPLY WIRING
LVG, HVG, OR HVE POWER SUPPLY
Dimming Cable
Wire Colors
INTERNATIONAL
COMPONENTS
1
Power Supply
2
AC Power Cable to Power Supply
3
DC Power Cable to Light Fixtures
(Refer to the RAZR Modular System Wiring Guide for the DC
Power Cabling for your configuration)
AC POWER CABLE CONNECTIONS
2 5
Americas
AC Cable Wire Colors
AC Cable Wire Colors
Black
White
Green
NOTE: In 3-phase power applications, the light fixtures/loads should be properly distributed across all three phases, and not all on the same phase.
0-10 V DIMMING SIGNAL CABLE CONNECTIONS
4
Dimming Cable Wire Color Americas
Red
Black
Bare Wire
NOTE: Connect the dim cable shield drain to only one PE ground connection point, i.e. at the dimming control panel.
Power Supply Connector
AC Power Connector
DC Power Connector
Dimming Connector
WIELAND© is a copyright of Wieland Electric GmbH. All rights reserved.
3
4
Dimming Cable
Wire Colors
AMERICAS
International
Power Supply
Pin Connection
Brown
L
Blue
N
Green-yellow
G
Dimming Cable Wire Color International
5
1
2
4
DC Dimming Signal Cable to Power Supply
5
Optional WIELAND© AC power cable adapters to Power Supply (i.e.
p/n CACE-71576-10) and Dca pigtail cable (i.e. p/n CACE-71650-10)
LVG
120 V
208 V
230 V
Phase
Phase
Phase
Neutral
Phase
Neutral
PE
PE
PE
Black
White
Bare Wire
Connector Type
Push-lock
Male M19, 3-pin
Push-lock
Female M19, 2-Pin
IEC61076-2-101
Threaded A-Code
Male M12, 3-pin
AC Power Cable
AC Power Cable
Wire Colors
Wire Colors
AMERICAS
INTERNATIONAL
HVE (347-400 V), HVG
240 V
277 V
347 V
400 V
Phase
Phase
Phase
Phase
Phase
Neutral
Neutral
Phase
PE
PE
PE
Power Supply Pin Connection
DIM (+)
DIM (-)
Shield Drain (not connected to PS)
Pin Assignments
Pin N: Neutral
Pin L: Line
Pin G: Ground
Pin 1: LED (-)
Pin 2: LED (+)
Pin 1: Dim (-)
Pin 3: Dim (+)
*Pin 4: 12VDC+
*Not Connected to Dimming Cable
480 V
Phase
Phase
PE
PE
21
Publicidad
