Publicidad
Idiomas disponibles
Idiomas disponibles
CEILING FAN WITH LIGHT
2. INSTALLATION GUIDE
FIG 1
Hanger bracket
Flat washer
Spring washer
1. (FIG 1) Turn off the electric circuit at the main fuse or circuit breaker box. Attach the hanger bracket to
the ceiling with springs washers, flat washers and 2 mounting screws.
Note: For sloped ceiling installation, make sure that the hanger bracket is installed so that the guide pin is
facing upward.
2. (FIG 2) Remove three housing screws and two collar screws. Take care not to drop the screws or washers
into the fan housing. Push the screws plate and the Top Housing upward, and slide them down the motor
wiring until they are out of the way.
FIG 3
Blade Screw W
Rubber Washer
Blade
3. (FIG 3) Insert the blade through the slot on the center band. Align holes and fasten blade to the motor
with blade screws and rubber washers. Repeat for remaining blades. After all blades are fastened securely
to the motor, restore the top housing and screw plate onto the motor and fasten it with the three housing
screws.
4. (FIG 4) Remove the hanger ball screw, the slide the hanger ball downwards.
Guide pin
Center Band
Slot
FIG 2
Motor wires
FIG 4
EN
Housing Screw
Screw Plate
Top Housing
Collar Screw
11
Publicidad
