CristalRecord Randy 85-368-05-002 Instrucciones De Instalación página 12

CEILING FAN WITH LIGHT
FIG 5
Hanger Pin
5. (FIG 5) Slide the support pin out. Remove the ground wire screws. Remove the lock pin and take off the
hanger pin. Remove the hanger ball.
6. (FIG 6) Thread the motor wires through the downrod.
FIG 7
7 (FIG 7) Insert the downrod into the collar, Slide hanger pin through holes of collar and downrod.
8. (FIG 8) Insert and tighten the two collar screws. Slide lock pin into hanger pin until it locks into position.
12
Support Pin FIG 6
Ball Joint
Lock Pin
Motor Wires
FIG 8
Collar Screws
Collar
EN
Downrod
Lock Pin