• Observe the plus (+) and minus (-) polarity signs.
• Protect the batteries from excessive heat.
• Do not charge or short-circuit batteries.
• If the device is not to be used for a relatively long
period, take the batteries out of the battery compart-
ment.
• Use identical or equivalent battery types only.
• Always replace all batteries at the same time.
• Do not use rechargeable batteries!
Notes on electromagnetic compatibility
• The device is suitable for use in all environments listed in
these instructions for use, including domestic environments.
• The use of the device may be limited in the presence of
electromagnetic disturbances. This could result in issues
such as error messages or the failure of the display/device.
• Avoid using this device directly next to other devices or
stacked on top of other devices, as this could lead to faulty
operation. If, however, it is necessary to use the device in
the manner stated, this device as well as the other devices
must be monitored to ensure they are working properly.
• The use of accessories other than those specified or
provided by the manufacturer of this device can lead to
an increase in electromagnetic emissions or a decrease in
the device's electromagnetic immunity; this can result in
faulty operation.
• Failure to comply with the above can impair the perfor-
mance of the device.
5. Device description
Blood pressure monitor and cuff
8
5
1. LCD
2. O/I button (Start/Stop)
3. Memory button (MEM)
4. Average button (T3)
5. Air socket
6. Micro USB socket for power
7. Battery compartment
8. Universal Cuff (type BF applied) for 22 - 42 cm arm
60
7 1
2
3
4
6