NOTE:
Specifications are subject to change without prior notice.
Not intended to be sterilized.
Not for use in an oxygen rich environment.
CAUTION!
• To avoid measurement errors, please avoid the condition
of strong electromagnetic field radiated interference signal
or electrical fast transient/burst signal.
• This equipment needs to be installed and put into service
in accordance with the information provided in the accom-
panying documents.
• Wireless communications equipment such as wireless
home network devices, mobile phones, cordless telepho-
nes and their base stations, walkie-talkies can affect this
equipment and should be kept at least a distance d away
from the equipment. The distance d is calculated by the
800 MHz to 2.5GHz column of Table 6 of IEC 60601-1-
2:2014, as appropriate.
• If you have any problems with this device, such as set-
ting up, maintaining or using, please contact with service
personnel of MEDEL. Don't open or repair the device by
yourself. This device must only be serviced, repaired and
opened by individuals at authorized sales centers.
• Please report to MEDEL if any unexpected operation or
events occour.
• After drop/shock,etc., that may cause changes in the per-
formance, please contact with service personnel of MEDEL.
Don't open or repair the device by yourself. The use of heat
and cold producing devices, such as electric heating blan-
kets, heating pads or ice packs, may impair the performance
of device and increase the risk of injury to the patient.
CAUTION!
• Keep the device out of the reach of children/pets to avoid
inhalation orswallowing of small parts.
• Be careful to strangulation due to cables and hoses, parti-
cularly due toexcessive length.
• Do not use the device if it is damaged in any way. The con-
tinuous use of adamaged unit may cause injury, improper
results, or serious danger.
• Please use accessories and detachable parts specified /
authorised by manufacturer. Otherwise, it may cause da-
mage to the unit or danger tothe user/patients.
• At least 30 min required of equipment to warm from the
minimum storage temperature between uses until it is
ready for intended use. At least 30 min required for ME
equipment to cool from the maximum storage temperature
between uses until it is ready for intended use.
• When not in use, store the device with adapter in a dry
room and protect it against extreme moisture, heat, lint,
dust and direct sunlight. Never place any heavy objects on
the storage case.
73