Descargar Imprimir esta página

Medel ELITE Instrucciones De Uso página 67

Ocultar thumbs Ver también para ELITE:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Error code
Possible cause(s)
E Exx
There is a calibrationa
problem
Out
Out of measurement range
8.1 Other possible malfunctions:
Problem
Possible cause(s)
Only the symbol
Batteries are drained.
"
Lo" flashes
The blood pressure
The cuff is not wrapped
values displayed
correctly or not at the level of
are abnormally high
the heart.
or low.
Too much stress is applied on
your shoulder or arm.
You move your arm or arm
muscles during measurement.
The (I.H.B.) symbol
You move your arm or arm
" " is displayed, but
muscles during measurement.
my heart beat rate
should be normal.
The light on the dis-
The batteries are flat or not
play is dim or not lit
right placed.
Recommended actions
Repeat the reading. If the problem persists, contact the Service Centre.
Refer to the warranty for the contact information and the instructions
concerning returns.
Relax for a moment. Refasten the cuff and then measure again. If the
problem persists,contact your physician.
Recommended actions
Replace all batteries with new ones.
Wrap the cuff correctly and rise your hand so that the cuff is at the same
level of your heart.
Relax yourself and make measurement.
Remain still and do not move /contract the muscles during measurement.
Remain still and do not move /contract the muscles during measurement.
Replace the flat batteries with new ones. Insert the batteries correctly.
67

Publicidad

loading