Publicidad
Idiomas disponibles
Idiomas disponibles
•
The wrenches can only be tightened
in one direction. Counter-clockwise
tightening is possible with the wrench
turned over.
The correct direction of tightening is
indicated by an arrow on the grip.
•
If necessary, these torque wrenches
can be readjusted without
dismantling.
The maximum permitted deviation from
the currently set loosening value is ± 3 %.
The Manoskop
EN ISO 6789, Type II, Class A.
Every Manoskop
number and is supplied with a works
calibration certificate.
Service Manoskop
... can be fitted with various insert tools.
For this purpose, the head of the wrench
has a recessed square drive at the face
(sizes are shown in the Technical
Specifications on page 27) with a double-
sided locating hole and insertion groove.
The insert tools can be attached in the
„normal" position or rotated through 180° .
Controlled counter clockwise tightening is
also possible.
26
®
730N complies with DIN
®
has a unique serial
®
730N ...
Publicidad
