Stahlwille Manoskop 730N Instrucciones De Utilizacion página 37

Setting torque levels using the
green scale
1. Pull the control knob out of the locking
position until it engages (A).
2. Turn the control knob (B) and check
the green main scale.
3. Firstly set a value which lies under the
desired setting.
4. Set the desired value. Example:
Manoskop
At this setting you can disregard the
values on the fine scale.
5. Check the correct setting again.
6. When you have set the desired value,
press the control knob back into the
locking position. The knob engages in
the notch with a click. The setting is
locked in.
7. The torque wrench is now ready for
use.
®
730N/10: 52,5 ft.lb.
37