Stahlwille Manoskop 730N Instrucciones De Utilizacion página 33

Attaching insert tools
1. Insert the insert tool into the internal
square drive on the face of the head
of the wrench.
2. The spring-loaded locking pin of the
QuickRelease safety lock of the insert
tool is depressed by the insertion
groove. Slide the insert tool further
until it stops. Ensure that the locking
pin engages in the locating hole.
3. Check to see that the insert tool is
properly attached.
4. To tighten counter clockwise, turn the
insert tool through 180° before
attaching to the torque wrench.
33