Publicidad
Idiomas disponibles
Idiomas disponibles
OMNIA M 3.2
10.7 Field settings
The unit shall be configured by the installer to match the installation environment (outdoor climate, installed options, etc.)
and user demand. A number of field settings are available. These settings are accessible and programmable through "FOR
SERVICEMAN" in user interface.
Powering on the unit
When power on the unit, "1%~99%" is displayed on the user interface during initialization. During this process the user
interface cannot be operated.
Procedure
To change one or more field settings, proceed as follows.
Temperature values displayed on the wired controller (user interface) are in °C.
About FOR SERVICEMAN
"FOR SERVICEMAN" is designed for the installer to set the
parameters.
•
Setting the composition of equipment.
•
Setting the parameters.
How to go to FOR SERVICEMAN
Go to MENLO FOR SERVICEMAN. Press
Press ◄ ► to navigate and press ▼ ▲ to adjust the
numerical value. Press
. The password is 234, the
following pages will be displayed after putting the password:
22T÷30T
NOTE
Keys
•
Go to the menu structure (on the home page)
•
Navigate the cursor on the display
◄ ► ▼
•
Navigate in the menu structure
•
Adjust settings
•
Turn on/off the space heating/cooling operation or DHW mode
•
Turn on/or off functions in the menu structure
•
Come back to the up level
•
Long press for unlock /lock the controller
•
Unlock /lock some functions such as "DHW temperature adjusting"
•
Go to the next step when programming a schedule in the menu
structure; and confirm a selection to enter in the submenu of the
menu structure.
:
Cod. 3QE47660 - Rev. 00 - 02/2022
Function
Press ▼ ▲ to scroll and use "
" to enter submenu.
127
EN
Publicidad
